You have no items in your shopping cart.
Note: The current promotional price will remain until Feb 10.
How to Set up Annke 4MP PoE Security System-N48PI/N44PI+I81FB
Please make sure that the max. resolution of the DVR is no less than the camera clarity when you choose, so images can present on a CCTV system clearly.
|Image sensor||1/3" Progressive Scan CMOS|
|Effective pixels||4 Mega pixels|
|Frame rate||50Hz: 20fps (2688×1520), 25fps(1920×1080), 25fps(1280×720) 60Hz: 20fps (2688×1520), 30fps (1920×1080), 30fps(1280×720)|
|Lens||4mm@ F2.0, Angle of view: 83°|
|Day &Night||IR cut filter with auto switch|
|Shutter Speed||1/3s -1/100,000s|
|Min. Illumination||0.01Lux @ (F1.2, AGC ON),0 Lux with IR|
|Wide Dynamic Range||120dB|
|Image Setting||Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser|
|BLC||Support, zone configurable|
|Network Storage||NAS (Support NFS,SMB/CIFS), ANR|
|Alarm Trigger||Motion detection, Tampering alarm, Network disconnect, IP address conflict, Storage exception|
|Protocols||TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP,PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour|
|General||One-key reset, Flash-prevention, dual stream, heartbeat, mirror, password protection, privacy mask, watermark, IP address filtering, Anonymous access|
|Standard||ONVIF(PROFILE S,PROFILE G),PSIA,CGI,ISAPI|
|Communication Interface||1 RJ45 10M/100M Ethernet port|
|Operating Conditions||-30 °C ~60 °C (-22 °F – 140 °F), Humidity 95% or less (non-condensing)|
|Power Supply||DC12V ± 10%, PoE (802.3af)|
|Power Consumption||Max. 5W|
|IR Range||Approx. 30 meters|
|Dimensions||70×154.2×60.5 mm (2.8” × 6.2” × 2.4”)|
* 1 x HD POE IP Cameras
* 1 x Mounting Screw Bag
* 1 x User's Manual/CD
* 1 x Deterrent Sticker
Write a Review
Easy to install
Review By Feddy Posted on 2016-10-07 16:23
Only one Ethernet cable is needed to run between it and the NVR, so a large amount cable is reduced and the installation is simplified. My husband got four of them hooked up in less than 2 hours. Good replacement for my old cameras.
Review By Ben Posted on 2016-10-01 10:44
Got this perfect camera a few days ago and it is now working good in my house. Picture is clear and smooth. Would like to recommend it to anyone.